Aqualog AW

AQUALOG AW is an high connectvity RTU designed to control and monitor water network systems.

AQUALOG AW is a controller of PRV and pumps for the district pressure adjustment. It also has extensive monitoring capabilities of connected sensors (pressure, temperature, level and quality).

• IoT via LoRaWAN Modem
• IP68 case
• Local visualization via multi-function display
• Wireless communications wi-fi
• Connection to the control center via GSM/GPRS/3G
• Hydro-valve/pump control according to 6 different modes “Discovery” Mode for detection and description of “Water Hammer” events thanks to high frequency virtual logger
• Additional automation functions and TCP/IP-WEB services are allowed by the HLCM-AW expansion module

• Digital inputs: 10 configurable as status inputs or counters; the first 6 support flow-rate calculation
• Analog inputs: 3 mV/V; 8 active/passive 4–20 mA; 2 PT1000/PT100
• Digital outputs: 4 open-collector outputs for PRV control
• Serial interface: 1 RS485
• Battery life: 5 years with 4 lithium batteries or 10 years with 7
• Power supply: 12/24 VDC and/or 230 VAC
• Communication: 2G/3G/4G; optional 868 MHz LoRaWAN and NB-IoT
• Local interfaces: Bluetooth, Wi-Fi and Mini USB Type B
• Protocols: MODBUS, IEC 60870-5-104, LoRaWAN and MQTT
• HMI: local display and buttons
• Internal antenna; external antenna optional
• Cable entries with O-rings or MIL connectors
• Protection: IP68, 100 days at 1 m water depth
• Operating temperature: -25 °C to +60 °C
• Dimensions and weight: 260 × 170 × 100 mm; 2 kg